Refilling HP 950 and 951 with QU-FILL™

The QU-FILL™ syringe cap is especially designed for ball valves on HP cartridges. It opens the valve and ink can be filled into the cartridge simultaneously. In these instructions we use the QU-FILL™ with a softmatic syringe to refill a HP 951 cyan cartridge using the vacuum method.

The first steps are to seal the two air vent holes at the HP 950 or 951 cartridge (see pictures 2+3). These vent holes need to be sealed to create a vacuum inside the cartridge. We use simple adhesive tape to seal the lateral and upper vent holes (see pictures) airtight.

The vacuum method is very popular, because you do not need to drill into or open the cartridge. Instead the ink is sucked into the cartridge.

After sealing the vent holes draw ink into the syringe. For the diversity of cartridges we recommend different amounts of ink.

  • black HP 950: approximately 23ml
  • coloured HP 951: approx. 9ml
  • black HP 950 XL: approx. 53ml (refilling in two rounds is recommended)
  • coloured HP 951 XL: approx. 17ml each

As you can see the big HP 950 XL cartridge contains 53ml ink. We recommend to fill the cartridge in two rounds so that you have enough way to pull the plunger up.

Insert the filled syringe with QU-FILL™ cap approximately 1cm into the ink outlet of the cartridge and hold it tight with one hand. Pull the plunger up to about 60ml (picture in the middle). Now release the plunger. Due to the vacuum inside the cartridge the ink is automatically sucked inside.

In our example it is enough to pull the plunger up onse. If that does not work with your cartridge you can repeat the procedure. Pull the plunger up again (if necessary a few times) until no ink is left inside the syringe. If you have too much ink inside the syringe give it some time to compensate the pressure differences. Than remove the syringe from the ink outlet. We recommend to choose a workplace that is protected against staining with ink. We assume no liability.

Features of the HP 950, HP 951 cartridges:

Until now there is no way to reset the chip on these cartridges. But as with almost all printers you can easily dismiss or ignore the filling level indicator and continue printing. Another way is to exchange the original chip into a new one from our assortment. The ink filling level is indicated correctly afterwards.

All trademarks, trade names or service marks are the property of their respective owners and are used for identification purposes only.

QU-Fill™ PROFI for HP® 932, 950, 953, 970, 980 and Primera spring valve cartridges, brass
QU-Fill™ PROFI for HP® 932, 950, 953, 970, 980 and Primera spring valve cartridges, brass
QU-FILL Profi* refill tool for Primera 053464, 053461, 053462, 053463 and HP® 932, 950, 953, 970, 980 dof solid brass for ball valve cartridges. Endless durability.
Content:   ( € /  )
HP 950XL, 951XL chips for black, cyan, magenta and yellow ink cartridges
HP 950XL, 951XL chips for black, cyan, magenta and yellow ink cartridges
Single-use chip set for HP 950XL, 951XL cartridges, every colour.
Content:   ( € /  )
Ink Refill Kit for HP 932, 940, 950 black
Ink Refill Kit for HP 932, 940, 950 black
This refill kit comprises everything you need to refill HP cartridges.
Content:   ( € /  )
Ink Refill Kit for HP 933, 940, 951 color
Ink Refill Kit for HP 933, 940, 951 color
This refill kit comprises everything you need to refill HP cartridges.
Content:   ( € /  )
Octopus Refill Ink for HP 932, 940, 950 pigmented black
Octopus Refill Ink for HP 932, 940, 950 pigmented black
Octopus Refill Ink was specially developed and produced for Canon CL-511, CL-513 cartridges and is subject to very strict quality control. Octopus Refill Ink is a specific Ink.
Content:   ( € /  )