Washing and care instructions for textiles with sublimation printing

Important information

To ensure you follow the correct procedure, be sure to read the washing and care instructions on the textile label. The following instructions mainly refer to the transfer film we use. New textiles often contain excess dyes that can come out during the first few washes. To avoid discoloring other items of clothing, you should always wash them separately first. In addition, slight edges may appear in the fabric at the pressing point. These are caused by the transfer paper during the printing process and will completely disappear from the fabric after 1 to 2 washes.

Wash

Our Octopus sublimation ink can be washed on a gentle cycle up to 30 °C. Please always turn printed items inside out before washing. We advise against using fabric softener as this can attack the pigments and cause them to fade.

Dryer

Printed textiles are generally not suitable for tumble drying. You can hang the textiles on the clothesline to dry.

Ironing

You can iron your printed clothing inside out at low heat up to 110 °C. Do not expose the relevant areas to the heat for too long.

Bleaching/Chlorining

Printed textiles must generally not be bleached or chlorinated.

Detailed washing and care instructions for textiles printed with our Octopus sublimation ink can be found here:
Instructions for textile printing with sublimation inks

[Translate to Englisch:] Alle Hersteller und Markennamen dienen nur zur Kenntlichmachung der Kompatibilität und sind Eigentum der jeweiligen Rechteinhaber.