Chip resetter for Epson inkjet cartridges
Suitable for the following cartridge models:
T007, T008, T009, T015, T016, T017, T018, T026, T027, T028, T029, T036, T037, T038, T039, T040, T041, T0321 bis T0324, T0421 bis T0424, T0331 bis T0336, T0431, T0441 bis T0444, T0461, T0472 bis T0474, T0481 bis T0486, T0491 bis T0496, T0540 bis T0549, T0551 bis T0554, T0557, T0561 bis T0564, T0591 bis T0599, T5591 bis T5596, T057, T0601 bis T0604, T0611 bis T0614, T0711 bis T0714, T0801 bis T0806, T0881 bis T0884
Resetter comes with 2 adapters for aligning the contacts on the chip with the pins on the resetter.
Always refill the cartridge before setting back the chip by the resetter.
Difference between cartridges refilled after reaching status and cartridges refilled before status “EMPTY“
Cartridges which are refilled before reaching the status EMPTY“ can be set back by the resetter. At the end of the reset process the LED shines GREEN. These cartridges are recognized by the printer as EPSON cartridges and do provide ink level control. Cartridges which are refilled after reaching the status “EMPTY“ can be set back by the resetter. At the end of the reset process the LED shines RED. These cartridges are recognized by the printer as ALTERNATIVE cartridges and do provide ink level control.
Reset Epson inkjet cartridges (9 pin chips)
Use the adapter marked with "9 pins".
The LED on top of the resetter should point upwards. Insert the cartridge into the slot of the adapter, the ink outlet of the cartridge points upwards.
Press the cartridge carefully on the pins on the resetter. The LED will blink red when the contact has been established between chip and resetter. After the reset process has been completed the LED shines green with cartridges that have not been printed to the status „EMPTY“. For cartridges that have been printed empty completely before refill, the LED shines red. Despite the red light these cartridges are set back too.
Please repeat the reset process for this type of cartridges to eliminate that a contact issue has occured during the reset.
Reset Epson inkjet cartridges (7 pin chips)
Epson cartridges having 7 pins on their chip are aligned manually with the pins on the resetter. The LED on top of the resetter should point upwards.
Press the cartridge carefully on the pins on the resetter. The LED will blink red when the contact has been established between chip and resetter. After the reset process has been completed the LED shines green with cartridges that have not been printed to the status „EMPTY“. For cartridges that have been printed empty completely before refill, the LED shines red. Despite the red light these cartridges are set back too.
Please repeat the reset process for this type of cartridges to eliminate that a contact issue has occured during the reset.
Activ Universal Chip Resetter for Epson printers
Ink Refill Kit (non-OEM) T0611, T0711, 16, 18, 26, 27 pigmentiert black for Epson