Refill Instruction for Epson Stylus Color S0 20036, S0 20066 cartridges
For Refilling you need:
- syringe with needle
- cyan, magenta, yellow ink (5ml each)
- cutter, tape
For refilling Epson S0 20034 cartridges, please follow the instructions below:
Stick a piece of tape over the ink outlet opening underneath the cartridge, so it is closed (see example 1). Turn the cartridge around again. In the middle of the cartridge, below the sticker, you can see the original filler openings (example 2). Expand these with a cutter. Draw up a proper amount of ink into the syringe and pierce the needle as deep as possible into the filler opening. Now you can inject the ink slowly into the cartridge. Never use the front openings. When ink comes out of the filler openings, remove 1-2 ml. Close the filler openings with a piece of tape afterwards (example 3).
Exclusion of liability:
Neither the printer manufacturer nor we are liable for damages caused through an improper or faulty filling. As the ink is water soluble, you can wash out the bottles after usage and put them into the Yellow bin. Syringes and needles (with protection cap!!!!!) belong to the residual waste. Of course, we are also willing to take back the empty bottles and the equipment. Please do not store within reach of children. When stored properly, the ink has got a durability of up to 3 years.
Ink Syringes with Needles (5 pcs.)