Refill Instructions for Primera LX-900

This refill manual for Primera LX-900 inkjet cartridges illustrates the refill of this cartridge type by using a syringe and needle for filling the refill ink into the sponge inside.

Preparation: You need the following supplies:

a cutter knife or putty knife
needles and syringes
a prepared workplace
ink (black, cyan, magenta, yellow)

Refilling procedure Primera LX-900:
Take the cartridge and carefully remove the label on the upper side (picture 1). A cutter knife or a small putty knife works best for this.

Now you can see the filler opening (picture 2) in which you can fill ink into the cartridge. Stick the needle into the cartridge and carefully insert the ink. If ink leaks from the opening on top or the ink outlet below, draw back about 1 ml ink into the syringe. Your cartridge is now refilled.

Primera LX-900 stick a needle into the cartridge

Specifics:
The series of cartridges for Primera LX-900 label printers is equipped with a chip that calculates the ink filling level and identifies the cartridge towards the printer. You need to change this chip after every refilling, otherwise it would tell you to insert a new cartridge.

Please refer to our instruction that describes the details and the handling of the chips.